SMH-100IRA
- Inverter 2-stage compressor
- Electronic expansion valve
- DC fan with speed control
- Rugged sheet design
- High efficiency
- WILO circulation pump
- Integrated expansion tank and safety valve
- Integrated backup heater
- User-friendly operation
- Equitherm regulation
- Control to maintain the constant output water temperature
- Control according to the reference room temperature
- Possibility to control via room thermostat
- Emergency mode (heating and hot water only)
- Cooling option
- Hot water heating
- Switching the electric backup heater
- 5 years warranty
| Capacity 1 | Heating Floor Heating | 9,5 | kW |
| Capacity 1 | Cooling Floor Cooling | 9,8 | kW |
| Power Input 1 | Heating Floor Heating | 2,20 | kW |
| Power Input 1 | Cooling Floor Cooling | 2,50 | kW |
| EER 1 | Cooling Floor Cooling | 3,92 | - |
| COP 1 | Heating Floor Heating | 4,30 | - |
| Capacity 2 | Heating Fan Coil or Radiator | 9,5 | kW |
| Capacity 2 | Cooling for Fan Coil | 7,4 | kW |
| Power Input 2 | Heating Fan Coil or Radiator | 2,7 | kW |
| Power Input 2 | Cooling for Fan Coil | 2,4 | kW |
| EER 2 | Cooling for Fan Coil | 3,11 | - |
| COP 2 | Heating Fan Coil or Radiator | 3,53 | - |
| Energy class | - | A+ | - |
| SCOP | SCOP | 3,7 | |
| Power Supply | - | 210 - 240 / 1 / 50 | V / Ph / Hz |
| Rated Power Input | Cooling / Heating | 4,0 / 3,1 | kW |
| Rated Current | Cooling | 14,0 | A |
| Rated Current | Heating | 16,5 | A |
| Refrigerant / Charge / Eq. CO2 | - | R410A / 3,5 / 7,3 | type / kg / t |
| Water pipes | Inlet | DN25 | inch |
| Water pipes | Outlet | DN25 | inch |
| Water temperature range | Heating | 25 ~ 60 | °C |
| Water temperature range | Cooling | 7 ~ 25 | °C |
| Water pump | Number of speeds | externally controlled | |
| Water pump | Power input | 140 | W |
| Water flow switch | Minimum flow | 9,2 | l / min |
| Expansion tank | Volume | 10 | l |
| Expansion tank | Maximum pressure | 3 | Bar |
| Expansion tank | Precharged pressure | 1 | Bar |
| Electric heater | Mode | automatic | |
| Electric Heater | Steps | 2 | - |
| Electric Heater | Capacity | 6 | kW |
| Electric Heater | Combination | 3 + 3 | - |
| Electric heater | Voltage / phase / frequency | 210-240 / 1 / 50 | V / f / Hz |
| Heat Exchanger | Type | Brazed Plate HEX | - |
| Heat Exchanger | Quantity | 1 | - |
| Safety Valve | - | 3 | Bar |
| Sound Pressure Level Lpa at 1 m | Cooling | 53 | dB |
| Sound Pressure Level Lpa at 1 m | Heating | 56 | dB |
| Sound power level | - | 69 | dB(A) |
| Dimension | (w x h x d) | 1390 x 412 x 890 | mm |
| Net Dimensions | (w x h x d) | 1463 x 428 x 1020 | mm |
| Net Weight | - | 148 | kg |
| Gross Weight | - | 161 | kg |
| Package volume | - | 0,639 | m3 |
| Operating Temperature Range | Cooling | 10 ~ 48 | °C |
| Operating Temperature Range | Heating | - 20 ~ 35 | °C |
| Operating Temperature Range | Water heating | - 20 ~ 45 | °C |
| Notes |
The specification of products is subject to change based further development of the units by the producer and can be changed without prior notice. Refer to rating label. 1 Capacities and power inputs are based on the following conditions:
2 Capacities and power inputs are based on the following conditions:
The devices contains fluorinated greenhouse gases covered by the Kyoto Protocol. Noise is tested in the semi-anechoic room, so it should be slightly higher in the actual Operation due to environmental change. Power input is tested under standard condition. |
||
