GSH-IRAD
- Compact and modern design
- Adopts high efficiency plate heat exchanger
- User friendly control panel
- Easy installation and maintenance
- Safe and reliable
- 5 years warranty
Power Supply | - | 380 - 415 / 3 / 50 | V / Ph / Hz |
Rated input | - | 6200 | W |
Refrigerant Gas Pipe | Diameter | 5/8 / 16 | inch / mm |
Refrigerant Liquid Pipe | Diameter | 3/8 / 9,5 | inch / mm |
Water Pipe Inlet / Outlet | Diameter | - (G1) / - (G1) | mm (inch) |
Safety Valve | - | 2,5 | Bar |
Leaving Water Temperature | Cooling (Fan Coil Unit) | 7 ~ 25 | °C |
Leaving Water Temperature | Cooling (Floor Cooling) | 18 ~ 25 | °C |
Leaving Water Temperature | Heating (Fan Coil Unit) | 25 ~ 55 (High Temperature Cycle) | °C |
Leaving Water Temperature | Heating (Floor Heating) | 25 ~ 45 (Low Temperature Cycle) | °C |
Pump | Type | ErP PWM | - |
Pump | Nr. of Speed | Automatic | - |
Pump | Power Input | 4 - 75 | W |
Expansion Vessel | Volume | 10 | l |
Expansion Vessel | Water Pressure (Max) | 3 | Bar |
Expansion Vessel | Water Pressure (Pre) | 1 | Bar |
Electric Heater | Operation | Automatic | - |
Electric Heater | Capacity | 6 | kW |
Electric Heater | Combination | 2 + 2 + 2 | - |
Electric Heater | Power Supply | 380 - 415 / 3 / 50 | V / Ph / Hz |
Heat Exchanger | Type | Brazed Plate HEX | - |
Heat Exchanger | Quantity | 1 | - |
Sound Pressure Level at 1 m | - | 24 | dB(A) |
Sound power level | - | 38 | dB(A) |
Outline Dimensions | w x d x h | 570 x 650 x 430 | mm |
Package Dimensions | w x d x h | 610 x 1010 x 430 | mm |
Net Weight | - | 64 | kg |
Gross Weight | - | 65 | kg |
Package volume | - | 0,265 | m3 |
Notes |
The specification of products is subject to change based further development of the units by the producer and can be changed without prior notice. Refer to rating label. Data are based on following conditions:
The devices contains fluorinated greenhouse gases covered by the Kyoto Protocol. Noise is tested in the semi-anechoic room, so it should be slightly higher in the actual Operation due to environmental change. Power input is tested under standard condition. |