NÁSTENNÉ JEDNOTKY

SDV4-80HAF2

  • Jednosmerný motor ventilátora
  • Výkon chladenia 8,0kW
  • Výkon kúrenia 9,0kW
  • 3 rýchlosti ventilátora (36 - 44dB)
  • Moderný dizajn
  • Display a infra prijímač pod čelným panelom
  • Diaľkový ovládač
  • Vonkajšia jednotka je samostatný produkt
Výkon Chladenie 8,0 kW
Výkon Kúrenie 9,0 kW
Napájanie - 220–240 / 1 / 50 V / Ph / Hz
Prevádzka Prietok vzduchu 1195 / 1005 / 809 m3 / h
Prevádzka Hladina akustického tlaku v 1 m 44 / 39 / 36 dB(A)
Chladivo - R410A type
Rozmery netto š x v x h 1194 x 343 x 262 mm
Rozmery balenia š x v x h 1290 x 375 x 460 mm
Hmotnosť netto - 17,0 kg
Hmotnosť brutto - 22,4 kg
Priemer potrubia Kvapalina 9,5 mm
Priemer potrubia Plyn 15,9 mm
Priemer potrubia Kondenzát 16,5 mm
Objem balenia - 0,223 m3

The pictures of units and accessories are illustrative only. Technical specifications of the products are subject of change based on further development of the units by the producer and may be changed without prior notice. If the ask of the output power is greater than the nominal value of the outdoor unit (or a combination of outdoor units, hereinafter the outdoor unit) the output power may be limited to a maximum of 100% of the nominal capacity of the outdoor unit. During the overall performance requirements of less than 10% of the nominal power can cause overcooling of the room operated by the indoor unit. The outdoor unit in order to protect the compressor can reject to start until the demand of power is in balance with potential risks.
The device contains fluorinated greenhouse gases covered by the Kyoto Protocol. Refrigerant: R410A (50% HFC-32, 50% HFC-125) with GWP (Global Warming Potential) 2088.

CONDITIONS UNDER WHICH HAS BEEN PERFORMED MEASUREMENTS OF TECHNICAL PARAMETERS:
OUTDOOR UNITS

  1.  Capacities are based on the following conditions: Cooling: Indoor temperature 27°C DB / 19°C WB; Outdoor temperature 35°C DB / 24°C WB. Heating: Indoor temperature 20°C DB / 15°C WB; Outdoor temperature 7°C DB / 6°C WB. Piping length: Interconnecting piping length is 7.5m, level difference is 0m.
  2. Connection piping diameter is based on the condition that the total equivalent liquid length is less than 90m. When the total equivalent liquid length is more than 90m, please refer to technical manual to choose the connection piping diameter.
  3. Sound values are measured in a semi-anechoic room, at a position 1m in front of the unit and 1.3m above the floor.
  4. The above data may be changed without notice for further improvement on quality and performance.

INDOOR UNITS

  1. Nominal cooling capacities are based on the following conditions: return air temperature: 27°C DB / 19°C WB, outdoor temperature: 35°C DB, equivalent ref. piping: 8m (horizontal).
  2. Nominal heating capacities are based on the following conditions: return air temperature: 20°CDB, outdoor temperature: 7°C DB / 6°C WB, equivalent ref. piping: 8m (horizontal).
  3. Sound values are measured at a position 1.4m in front of the unit.

Naši zákazníci a obchodní partneri

Naša hlavná sila je v ponuke kvalitných produktov za rozumné ceny. Pomer cena - kvalita je pre nás zásadná. Máme široký sortiment výrobkov s veľmi dobrou skladovou dostupnosťou po celý rok. Kladieme dôraz na predajné aj popredajné služby, rýchlu distribúciu náhradných dielov, flexibilnú technickú podporu a tiež zaisťujeme technické a obchodné školenia.

S obchodnými partnermi vytvárame dlhodobý vzťah, ktorý výrazne podporuje našu vzájomnú obchodnú spoluprácu.

Vaše voľby týkajúce sa nastavenia súborov cookie na tomto webe: Prečítajte si naše zásady pre súbory cookie