Chillers and fan coil units

 Sinclair DC inverter Mini chillers use modern design and structure. Hydraulic module is a part of the outdoor unit. Cooling by air by the heat pump, no need of water cooling towers on the condensation side.

Sinclair modular chillers have DC inverter compressors. Capacities 30kW, 60kW and 90kW can be used individually. Using a modular interconnection, a total capacity of up to 1440kW can be achieved.

Wall fan coil units, 2-pipe have an economical DC fan motor, built-in 3-way valve. The package includes a remote control.

Floor ceiling fan coil units, 2-pipe have an economical DC fan motor and allow horizontal or vertical installation.

SF units are supplied as fans and water coils in one casing. The cassette type is supplied with condensate lift pump and back up electric heater element. Hot or cold water is supplied to the SF unit where it passes through the coil that either heats or cools the air which is then put back into the room.

Four-way cassette fan coil units, 2-pipe have an economical DC fan motor and a condensate drain pump. The package includes a remote control.

Four-way cassette fan coil units, 4-pipe have independent cooling and heating circuits. They are equipped with a condensate drain pump. The package includes a remote control.

SF units are supplied as fans and water coils in one casing. The duct type is supplied with condensate lift pump and back up electric heater element. Hot or cold water is supplied to the SF unit where it passes through the coil that either heats or cools the air which is then put back into the room.

Duct fan coil units, 2-pipe, 3-row, have an economical DC fan motor with possibility to set static pressure to 12, 30 and 50Pa.