Heat Pumps

S-THERM 4 INDOOR UNITS

New S-THERM 4th generation indoor units enable to remotely control via Ewpe Smart application, so you can have the warmth of your home under control even if you’re away. The new touch display controller is easy to use and contains multiple setting options including a weather-dependent mode that regulates outlet water temperature according to the outdoor air temperature. Thanks to built-in three-way valve it’s possible to use this unit for domestic hot water heating and save costs even in the summertime. This unit is suitable for cooling via fan-coil units.

Product detail
GSH-60IRB
Product detail
GSH-80IRB
Product detail
GSH-100IRB

S-THERM 4 OUTDOOR UNITS

Outdoor units of S-THERM 4th generation are different from the 3rd generation mainly because of the used refrigerant. Units are prefilled with single-component refrigerant R32 which is more gentle to the environment. Innovated refrigerant circuit solution with economizer and intermediate enthalpy adding through gas injection helps to achieve better operating range, improving both capacity and efficiency and regulate compressor temperature.

Product detail
GSH-60ERB
Product detail
GSH-80ERB
Product detail
GSH-100ERB

S-THERM 3 INDOOR UNITS

The new GSH-IRADA hydrobox in combination with the 3rd generation of S-THERM outdoor units is designed for heating especially buildings with a low-temperature heating system, such as floor or ceiling heating. The design of the unit also allows heating by radiators, but it is limited by the maximum leaving water temperature of 60°C. Thanks to the 3-way valve, there is also the possibility of heating hot water, so that the heat pump can work all year round. In addition, the insulation of the components allows the unit to be used for cooling purposes with the cooling water temperature below the condensation temperature. In summer, it can be used in combination with fan coil units.

Product detail
GSH-IRADA
Product detail
SCMI-03
Communication Module

S-THERM 3 OUTDOOR UNITS

For the upcoming season we are introducing the 3rd generation of S-THERM water heat pump. The new generation maintains split solution and is designed especially for buildings where underfloor heating is predominating. The construction of units allows heating by means of radiators, however, it is limited by maximum outlet water temperature 55°C. Heating water function is also offered. Heat pumps may be used also for cooling with cooling water temperature over the condensing temperature. Combination with cooling ceiling is recommended too.

Product detail
GSH-70ERAD
Product detail
GSH-90ERAD
Product detail
GSH-110ERAD
Product detail
GSH-130ERAD

S-THERM+ 2 INDOOR UNIT

S-THERM+ Series has been specially designed for cold climate. It can work at ambient temperatures down to -20 °C. The basic philosophy of this series is to satisfy all heating requirements during the frosty winter and allow cooling during sweltering summer and autumn. The EVI Scroll compressor is equipped with steam injection technology for more economic performance. Higher efficiency is achieved by using a two-stage cooling circuit, which also increases heating performance. S-THERM + Series units can easily achieve outlet water temperatures up to 60 °C.

Product detail
SHP-140ICA
Product detail
SHP-180ICA

S-THERM+ 2 OUTDOOR UNIT

S-THERM+ Series has been specially designed for cold climate. It can work at ambient temperatures down to -20 °C. The basic philosophy of this series is to satisfy all heating requirements during the frosty winter and allow cooling during sweltering summer and autumn. The EVI Scroll compressor is equipped with steam injection technology for more economic performance. Higher efficiency is achieved by using a two-stage cooling circuit, which also increases heating performance. S-THERM + Series units can easily achieve outlet water temperatures up to 60 °C.

Product detail
SHP-140ECA2
Product detail
SHP-180ECA2

SEPARATE WATER TANKS

For optimal performance of a heat pump, it is also important to use a suitable tank. This is why SINCLAIR provides wide range of storage tanks and DHW tanks (domestic hot water), which are optimized for use with heat pumps.

Product detail
ST-300AF
Product detail
ST-300DE
Product detail
ST-400DE
Product detail
ST-500AF
Product detail
ST-500MC
Product detail
ST-500MCS

MONOBLOCK UNITS

The SMH inverter heat pump has a monoblock design. Therefore, it is only an outdoor unit. Using the modern 2-stage compressor with speed control it can provide high efficiency even at low temperatures. At high temperatures, the heat pump can reduce its performance using the speed control. 

The control system allows to adjust the heat pump parameters to suit the particular object. It offers several ways to control the output temperature for both heating and cooling. The unit is controlled via the user-friendly control panel with text display, so it is not necessary to intricately look for parameter codes as with the other units.

Product detail
SMH-140IRA
Product detail
SMH-60IRB
Product detail
SMH-100IRB
Product detail
SMH-160IRB

Our Clients And Business Partners

Our strength is quality products with reasonable price setting. We have very wide product range, with very good stock availability whole year round. We put emphasis on aftersales service, spare parts availability and technical support, also we provide technical trainings. With our partners we create long term, mutually benefitial business cooperation.

EPCOS, ABB, O2, E.ON, Ferona, Systemair